Amplifiers  |  Preamps  |  Speakers  |  Analog  |  Digital  |  Cables and Power Products  |  Other  | Subwoofers

 

Plinius Hautonga

Choice Audio is proud to carry the Plinius Hautonga.  We feel it is one of the finest integrated amplifiers on the market and it’s performance rivals separates costing twice as much.

If you are looking to save some space and get away from separates, then you should really consider auditioning the Plinius Hautonga.  At 200 watts per channel into 8 ohms, there are not many speakers that this amp can’t drive.  The Hautonga can effortlessly drive your speakers and you will be very surprised by the bass response of these amplifiers.  If you enjoy bass, put this integrated on your short list.

The preamp section of the Plinius Hautonga is outstanding as well.  We have found it comparable to many preamps, (including tube preamps) in the $5,000 price range.  The phono stage is equally impressive.  We have hooked the Plinius Hautonga up to Magico S5s, Magico S1s, Martin Logan Ethos, KEF LS-50s and others.  In all cases the Hautonga fails to impress.

Choice Audio is proud to be the Plinius Dealer for the Minneapolis St. Paul area 

Now Available for Demo!

Specifications:

Power:
200 watts RMS per channel into 8 ohms
280 watts RMS per channel into 4 ohms
Both channels driven from 20Hz to
20kHz at less than 0.2% total harmonic distortion

Frequency Response:
20Hz to 20kHz +/–0.2dB
–3dB at 5Hz and –3dB at 70kHz

Distortion:
Typically <0.05% THD at rated power0.2% THD and IM worst case prior to clipping Current Output:
40A short duration peak per channel
Fuse protected

Slew Rate: 50V/μs

Hum & Noise:
90dB below rated output 20Hz to 20kHz unweighted

Gain:
Line inputs to speaker out: 40dB
Phono Input To Pre Out: 66dB on high gain, 60dB on low gain

Input Impedance:
47k ohms all inputs

Rated Pre Out Level:
1.5V RMS into 47k ohms or higher

Pre Out Source Impedance: Typically 1.5k ohms

Pre Out Minimum Recommended Load:  47k ohms

Line Out Level: 190mV at 200 ohms

Power Consumption: 
600VA
0.4A (92W) Class AB Idle
0.14A (32W) Standby

Dimensions: (H x W x D)
4.75″ x 17.75″ x 15.75″

Weight: 30lbs.